Shocker

Shocker
A stand alone compressed air operated combination suction and gravity system with a 90ltr storage capacity, combining the simplicity of the Budget Shocker system this unit also integrates a hydraulic tool which punctures the shock absorbers allowing the majority of fluid to be sucked through the piercing tip, residual fluid is then extracted through the punctured hole with a suction probe. The tool incorporates a seal to minimise fluid leakage during the puncturing/suction process.  Also included is a shrouded drill attachment.

Budget Shocker

Budget Shocker
Designed to drain shock absorbers in accordance with the shock absorber Manufacturers instructions.
A combination suction and gravity vessel with a 70ltr capacity. Very simple to use, compressed air operated supplied complete with a shrouded drill unit. Determine the drill point on the shock absorber unit and drill in to the shock absorber to release the oil with the shroud of the drill against the unit. Use the suction probe on the vessel to suck out the remaining oil.